iSANMATE PLA i7+ Pink 3d Filament 1.75mm 1kg/roll 【Bulk Purchase】
PLA i7+ pink 3d filament greatly enhances the impact resistance and toughness of the filament. Support up to 150mm/s printing speed. The surface of the printed model is smooth and delicate, and its performance is excellent. It is as easy to print as ordinary PLA material, and its excellent performance makes it more suitable for some industrial types of models.If you have bulk purchasing needs, please feel free to contact us.
Color:
Introductory video about PLA i7+ Pink 3d Filament
iSANMATE PLA i7+ Pink Filament Product Description
Good Liquidity
A low shrinkage and not easy to wrap the edges. The Black PLA+ filament model comes out with excellent printing effect.
Multi-colors Available
Available in a variety of colors，If you want to see the content of other colors, you can click the picture below
High print speed
Support the printing speed range of 50-150mm/s, which can make your printing more efficient
Good toughness
Made of high-quality raw materials, the filament has strong toughness and is not prone to brittleness and other problems.
High precison
Keep the stable tolerance in +/-0.02mm, no clogging and ensure the great 3D printing effect.
Environmentally friendly
All raw material are imported from Thailand and USA. We promise all the raw material quality are great 100% pure.
Easy to print
Our pla+ filament 1.75mm works for 99% FDM 3D printers &3D pens
Vacuum Sealed Packing
Vacuumed packed—Some 3D printing materials can be negatively affected by moisture, that’s why 3D printer filament made by us is vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust and dirt before opening the vacuumed sealed packing.
Model Show
Company Photo Wall
Certifications
| Property | Typical value |
| Density | 1.22-1.23 g/cm³ |
| Melt finger(190°C, 2160g) | 4.12 G/10min |
| Melting point | 170-190°C |
| Vicat softening point(A/120) | 55°C |
| Tensile Strength | 61 MPa |
| Elongation at break | 22% |
| Bending strength | 73 MPa |
| Impact strength | 8.8 kJ/M² |
| Water absorption | <0.6% |
| Printing temperature | 200-220°C |
| Subject | Download |
| PLA+ Curaprofile |  |
| iSANMATE_PLA_TDS | |
