
Flexible filaments can be a little tricky to print, especially if you are used to working with PLA or PETG. PEBA 90A offers excellent flexibility and elastic recovery, but getting consistent results depends on a few important settings.
If you’re printing with iSANMATE PEBA 90A for the first time, don’t worry about pushing the speed too high or adjusting every setting at once. Start with the recommended parameters, make sure the filament is dry, and fine-tune your printer based on the results.
Here’s a practical guide to PEBA 90A filament settings, including nozzle temperature, bed temperature, printing speed, retraction, and printer compatibility.
If you’re new to this material, start with our PEBA 90A Filament Guide to learn more about its properties, benefits, and applications.
Recommended PEBA 90A Printing Settings
Before getting started, here’s a quick reference for iSANMATE PEBA 90A.
| Setting | Recommended Value |
| Nozzle Temperature | 230°C |
| Bed Temperature | 35–65°C |
| Printing Speed | 40–80 mm/s |
| Retraction Distance (Direct Drive) | 0–0.4 mm (Direct Drive); 1.4 mm (Bowden) |
| Retraction Speed | 0–50 mm/s;20 mm/s (recommended) |
| Cooling Fan | 30–70% |
| Nozzle Size | 0.4 mm (recommended), 0.6 / 0.8 mm |
| Drying | 80°C for 8–12 hours |
These settings are a starting point for iSANMATE PEBA 90A. Your results may vary depending on the printer, extruder design, and model geometry.
Looking for a flexible filament for your next project? Check out iSANMATE PEBA 90A Filament and find the right color for your next project.
Nozzle Temperature: 230°C
The recommended nozzle temperature for iSANMATE PEBA 90A is 230°C.
If the temperature is too low, you may notice inconsistent extrusion or poor layer bonding. On the other hand, excessive heat can contribute to oozing and stringing.
Start at 230°C and print a small test model before making adjustments. If extrusion looks uneven, check the filament’s moisture condition and feeding path before immediately increasing the temperature.
A 0.4 mm nozzle is recommended for general printing. You can also use 0.6 mm or 0.8 mm nozzles for larger or less detailed models.
Bed Temperature: 35–65°C
For PEBA 90A, the recommended bed temperature is 35–65°C, and a conventional build plate can be used.
Start within this range and check how well the first layer sticks. If the model doesn’t adhere properly, adjust the bed temperature gradually rather than changing several settings at once.
Make sure the first layer is consistent across the build plate. A good first layer makes a big difference, especially when printing flexible parts with a larger contact area.
PEBA Filament Printing Speed: 40–80 mm/s
Wondering how fast you can print PEBA 90A? The recommended printing speed is 40–80 mm/s, but starting slower is usually the better approach.
Printing suggestion:
- Primary printing: 40 mm/s
- Daily printing: 40–60 mm/s
- Higher printing: 60–80 mm/s
Don’t assume that a faster speed will always give you a better result. If you notice skipped extrusion, uneven walls, or inconsistent layers, reduce the speed and check the filament feeding system.
PEBA Retraction Settings

Retraction helps reduce unwanted filament oozing when the print head moves between separate areas. However, flexible filaments need a more careful approach.
For iSANMATE PEBA 90A, the recommended retraction distances are:
- Direct Drive: 0–0.4 mm
- Bowden: Around 1.4 mm
Direct-drive extruders have a shorter distance between the drive gears and nozzle, so they generally need less retraction.
Start with minimal retraction on a direct-drive printer. If you notice stringing, make small adjustments rather than immediately using a long retraction distance.
For retraction speed, start around 20 mm/s and tune it based on your printer. Avoid making aggressive changes, as excessive retraction can interrupt filament feeding.
Cooling Settings: 30–70%
The recommended cooling fan range for PEBA 90A is 30–70%.
Cooling requirements depend on the model you’re printing.
For larger parts or models with continuous walls, moderate cooling is a reasonable starting point. For small details and bridges, increasing the fan speed may help improve shape definition.
If you notice weak bonding between layers, try reducing the cooling level. The goal is to find a balance between clean details and good layer adhesion.
Direct Drive vs. Bowden: Which Is Better for PEBA?
If you have a choice, a direct-drive printer is the recommended option for PEBA 90A.
With direct drive, the extruder sits closer to the hotend. This creates a shorter filament path and gives the printer better control when feeding flexible materials.
Bowden printers can also be worth trying, but they usually require more tuning. The longer PTFE tube can allow flexible filament to compress or move around during feeding, making extrusion less consistent.
Here’s a quick comparison:
| Extruder Type | Recommendation |
| Direct Drive | Preferred; easier filament feeding and retraction control |
| Bowden | Possible, but requires more careful feeding and retraction adjustments |
If you’re using a Bowden setup, pay particular attention to the filament path and start with the recommended 1.4 mm retraction distance.
Still deciding between PEBA and TPU? Read our comparison of PEBA 90A vs TPU 90A to see how they differ in flexibility, rebound, and printing performance.
Which 3D Printers Are Compatible with PEBA 90A?
PEBA 90A can be used on compatible FDM 3D printers that support flexible filament printing.
However, printer compatibility isn’t just about whether the machine can reach 230°C. The extruder design, filament path, and feeding stability all matter.
For a smoother experience, look for a printer with:
- A direct-drive extruder.
- A well-guided filament feeding path.
- Stable extrusion at lower printing speeds.
- Adjustable retraction and cooling settings.
If you’re using a Bowden printer, it may still be possible to print PEBA 90A, but expect to spend more time tuning the settings.
Tested on Bambu Lab X1C
iSANMATE PEBA 90A has been tested on the Bambu Lab X1C using the Bambu Lab TPU 95A preset, completing a continuous 72+ hour print run without anomalies. This provides a useful starting point for Bambu Lab users. However, printing results may vary depending on the printer, extruder design, and model settings.
Drying PEBA 90A: 80°C for 8–12 Hours

Before printing, dry iSANMATE PEBA 90A in a forced-air oven at 80°C for 8–12 hours. This step is important because moisture in the filament can cause bubbles during extrusion and affect surface quality. After drying, keep the filament in a dry storage environment. If you don’t use the spool regularly, avoid leaving it exposed to open air for extended periods.
Frequently Asked Questions
🔎 What temperature should I print PEBA 90A at?
The recommended nozzle temperature for iSANMATE PEBA 90A is 230°C, with a bed temperature of 35–65°C.
🔎 What is the best printing speed for PEBA filament?
The recommended range is 40–80 mm/s. Start at 40 mm/s and increase gradually after confirming stable extrusion.
🔎 Can I print PEBA 90A with a Bowden extruder?
Yes, it may be possible, but Bowden setups require more careful filament feeding and retraction adjustments. Direct drive is preferred.
🔎 Does PEBA 90A need to be dried before printing?
Yes. Dry the filament at 80°C for 8–12 hours before printing to reduce moisture-related defects.
Final Thoughts
Printing PEBA 90A doesn’t have to be complicated. Start with the recommended temperature of 230°C, keep your printing speed around 40 mm/s for the first test, and pay close attention to filament drying and feeding.
A direct-drive printer will generally make the process easier, but Bowden users can also experiment with the right adjustments.
Once you have a stable baseline, you can fine-tune the settings to suit your printer and model.
Ready to try flexible 3D printing with PEBA 90A? Explore iSANMATE PEBA 90A Filament for more product details and technical specifications.