PEBA 90A is a flexible 3D printing filament known for its high rebound and elasticity. But like other flexible materials, it can absorb moisture from the air during storage. When that happens, you may notice more stringing, rough surfaces, or inconsistent extrusion.
If your PEBA prints are not coming out as expected, moisture could be one of the reasons. In this guide, we’ll explain how to recognize wet PEBA filament, how to dry iSANMATE PEBA 90A, and how to keep it dry between prints.
For starter, you can check our PEBA 90A Filament Guide for more details.
Why Does PEBA Filament Absorb Moisture?
PEBA (Polyether Block Amide) contains polymer structures that can interact with moisture in the surrounding air. Leaving the filament exposed for long periods, especially in a humid environment, can allow it to absorb water.
Even a spool that printed well when first opened may develop moisture-related issues after sitting out for a while. This is why proper drying and storage matter, particularly if you don’t use your PEBA filament every day.
Signs of Wet PEBA Filament

Not sure if your PEBA filament has absorbed moisture? Look for these common signs during printing:
- Popping or sizzling sounds: Small popping sounds during extrusion may indicate that moisture is turning into steam inside the hotend.
- Excessive stringing: Fine threads may appear between printed sections, leaving the model looking messy.
- Bubbles or tiny holes: Moisture-related extrusion defects can leave small bubbles or gaps on the printed surface.
- Rough or uneven surfaces: The finished model may have an inconsistent texture instead of a smooth appearance.
- Unstable extrusion: Material may not come out consistently, resulting in uneven lines or visible gaps.
These signs can also be caused by incorrect temperature, retraction, or other print settings. If you notice several of them at the same time, drying your filament is a good place to start.
If stringing or extrusion problems continue after drying, check your PEBA 90A printing settings to review nozzle temperature, retraction, and printing speed.
Recommended PEBA 90A Drying Temperature and Time

For iSANMATE PEBA 90A filament, the recommended drying conditions are:
- Temperature: 80°C (176°F)
- Drying time: 8–12 hours
Place the spool in a filament dryer or suitable forced-air drying equipment with stable temperature control and good airflow. Make sure the spool material can withstand 80°C without deforming, and avoid placing the filament directly against a heating element.
The recommended drying time may vary depending on how much moisture the filament has absorbed and the performance of the drying equipment. If the spool has been exposed to humid air for an extended period, use the full recommended drying time.
After drying, transfer the filament to a sealed dry box or another airtight storage container to reduce moisture exposure before printing.
Note: The 80°C, 8–12-hour recommendation is specifically for iSANMATE PEBA 90A. Other PEBA filaments may require different drying conditions, so always follow the manufacturer’s recommendations.
How Does Moisture Affect PEBA Printing Quality?
Moisture can affect more than just the appearance of your print. When water inside the filament heats up in the hotend, it can turn into steam and interfere with smooth Moisture inside PEBA filament can cause problems when it reaches the hotend. As the filament heats up, the absorbed water turns into steam, which can interrupt smooth extrusion.
This can affect how consistently the filament flows through the nozzle and leave defects on the printed model. You may notice rough surfaces, small gaps, bubbles, or weaker-looking layer connections.
If your PEBA prints show these issues, drying the filament before changing multiple print settings is a good first step. Once the filament is dry, you can check other factors such as nozzle temperature, retraction, and printing speed if problems continue.
How to Store PEBA Filament After Drying
Drying your filament is only half the job. Leaving it exposed to air after drying can allow it to absorb moisture again.
To keep your PEBA 90A in good condition:
- Use an airtight container: Store the spool in a sealed filament bag or dry box when not in use.
- Add desiccant: Silica gel helps absorb moisture inside the storage container.
- Keep an eye on humidity: A humidity indicator or digital hygrometer can help you monitor the storage environment.
- Avoid leaving filament exposed: Return the spool to a sealed container after printing, especially in humid conditions.
Good storage habits can reduce the need for repeated drying and help keep your filament ready for the next print.
Can You Print PEBA Directly From a Dry Box?
Yes. If your PEBA filament has been properly dried and your dry box can maintain a low-humidity environment, you can feed the filament directly from the box into your 3D printer. This is especially useful for longer prints or when using flexible filament regularly. Keeping the spool inside a dry box helps reduce its exposure to moisture in the surrounding air.
However, a dry box and a filament dryer serve different purposes:
- Filament dryer: Uses controlled heat to remove moisture from filament that has already absorbed water.
- Dry box: Keeps filament in a dry environment to help prevent moisture absorption during storage and printing.
If your PEBA filament already shows signs of moisture-related problems, dry it first using the recommended conditions before feeding it from a dry box.
For more information on nozzle temperature, printing speed, and other setup recommendations, see our PEBA 90A printing settings guide.
Final Thoughts
Keeping PEBA 90A dry is a simple but important part of getting consistent printing results. If you notice popping sounds, bubbles, excessive stringing, or rough surfaces, check the filament’s moisture condition before making major changes to your print settings.
For iSANMATE PEBA 90A, start with 80°C for 8–12 hours, then store the spool in a sealed dry box with desiccant.
Need help getting better results with flexible filament? Check out our PEBA 90A Filament Printing Settings Guide for more tips on temperature, speed, and other printing parameters.