iSANMATE Whosale PLA Red Glow in the dark filament
Red glow in the 3d filament is like any standard filament but with one key difference: It glows after being charged with light. This effect is achieved by additives such as strontium aluminate (and sometimes zinc sulfide and calcium sulfide), which absorb UV light and re-emit it as visible light. You’ll find glow-in-the-dark variants of PLA, and they’re the perfect way to add a glowing effect to a decorative or cosplay print!
Color:
Product Description
Product Advantages
Our PLA+ matte two-color gradient filament have many advantages, no clogging and ensure the 3d printing effect. Increases toughness iSANMATE PLA +Toughness is 5 times higher than normal PLA.
iSANMATE PLA+ Filament vs PLA Filament
Neat winding, no warping no bubble and the model printed at high speed is very smooth.
Wide applicability
Our 3D Filaments are wide applicability which can work for 99% FDM 3D Printer & 3D Pen.
Print Models
Packing
Customer Print Case
Company Photo Wall
Certifications
| Property | Typical value |
| Density | 1.22-1.23 g/cm³ |
| Melt finger(190°C, 2160g) | 4.12 G/10min |
| Melting point | 170-190°C |
| Vicat softening point(A/120) | 55°C |
| Tensile Strength | 61 MPa |
| Elongation at break | 22% |
| Bending strength | 73 MPa |
| Impact strength | 8.8 kJ/M² |
| Water absorption | <0.6% |
| Printing temperature | 200-220°C |
| Subject | Download |
| PLA+ Curaprofile |  |
| iSANMATE_PLA_TDS | |
