Introductory video about YM-AUTO-600：
Achievement display
Parameter Information：
| YM-AUTO-600 | |||
|---|---|---|---|
| Technology | FDM | Power : | 100~250 V, 50~60 Hz 2800W |
| Print volume: | 600*600*100MM | Power failure recovery : | Yes |
| Filament Diameter: | 1.75mm | No Filament warning | Yes |
| Filament material: | ASA, ABS, CF-ABS, PETG, HIPS, PC, PA, TPU, PLA, CF-PLA, PVA… | Contorl : | Wifi control |
| Extruder | 2 in 1 extruder | UV Light Curing System : | Yes |
| Nozzle Diameter: | 0.6 mm (standard) 0.4 mm, 0.8 mm, 1.0 mm (Choosable) | UV Light At Base And Top | Yes |
| Nozzle material： | Copper alloy (standard) hardened steel or others (Choosable) | Auto leveling : | Yes |
| Layer Thickness: | 0.1 – 0.6 mm | Camera Monitoring : | Can add |
| Position Resolution : | X/Y:8.9 μm Z :2.5 μm | Printer size: | 965*1100*800 mm |
| Max Printhead Temperature: | 275℃ | Package: | 1015*1150*965 mm |
| Max hot bed Temp: | 80℃ | N.W./G.W. | 160KG /180KG |
| Charber Temp: | 30-40℃（Open the hot bed to 80℃ and close the door ,after 1 hour the ineer temp will up to 40℃） | Support Software : | IEMAI3D, CURA, SIMPLIFY3D |
| Platform material : | High temp Glass | Support File Type : | STL, GCODE,OBJ,3MF ... |
| Platform fixed : | Clamps grip | Support System : | Windows 7.8.10.11 64bit |
Product Description：
1.Easy Operate Interface
Our slicing software supports AI and CDR vector graphics. After importing the vector graphics, you can freely pull the fonts to make various effects.
2.2 in 1 extruder
The printer is equipped with two in one extruder, which allow you to print two colors at the same time, and two filaments share a print head, there will be no layering.
3.Automatic leveling+micrometer leveling
It can be directly seen that when the platform is skewed, you can use the micrometer on the side to manually level it, and then enable the automatic leveling.Quickly level the platform .
4.Fully enclosed chamber
Fully enclosed chamber can print more material and are not affected by the weather. In winter, the room temperature is lower than 5℃, and PLA materials cannot be printed without a enclosed chamber.
5.Filament case can heated
The fully enclosed storage of printing materials is not easy to get wet, which can improve the printing quality.
At the same time, it also has a heating function, which is equivalent to a dryer. Can be heated up to 65℃.
6.Built-in UV curing system
The built-in UV curing system is distributed on the top and bottom of the printer, suitable for UV glue with different curing parameters.
Cooperation Case:
Our factory：
Past Awards:
National High Tech Enterprises
From Department of science and technology of China
The award is China’s recognition of technological innovation enterprises.
5 Top Additive Manufacturing Startus in Automotive
From Startus Insight
StartUs Insights is a worldwide operating data science company headquartered in Austria.
Chinese Industrial AM Manufacturer
From 3D natives
3Dnatives is the largest international online media platform on 3D printing and its applications.
Alibaba Gold Honest Enterprise Certification
From Alibaba
Alibaba inspected the factory and recognized our strength as a manufacturer.
Bronze Award Of Industry Outstanding Brand
From 3D printing Innovation Center
Founded in 2013, the center has developed into the most influential 3D printing platform in China
Global 2019 Best PEEK 3D Printer
From Aniwaa
Aniwaa is an independent online platform facilitating the discovery.
Service Support:
1.When you get the printer, check the packing if any broken,then unpack it; then connect power,check XYZ transportation,do bed calibration; then print the test file which is in SD card. If ok, then you can print. No need other special operation.
2.If you have any question about printing, you can send email to me also, then i will ask engineer to reply. It’s better to contact us at Wechat, because we can make a group with engineers. Or use Whatsapp is also quick .
Reviews
There are no reviews yet.