iSANMATE Pla Carbon Fiber 3D Printer Filament
iSANMATE PLA carbon fiber filament is a composite of PLA material and chopped carbon fiber material. Compared with ordinary pla material, it has stronger hardness and stiffness, and has good adhesion between layers. The model printed with this material is lighter in weight. More rigid while printing without a closed environment.
Color:
Product Description
Product Advantages
Our PLA+ matte two-color gradient filament have many advantages, no clogging and ensure the 3d printing effect. Increases toughness iSANMATE PLA +Toughness is 5 times higher than normal PLA.
iSANMATE PLA+ Filament vs PLA Filament
Neat winding, no warping no bubble and the model printed at high speed is very smooth.
Wide applicability
Our 3D Filaments are wide applicability which can work for 99% FDM 3D Printer & 3D Pen.
Print Models
Packing
Customer Print Case
Company Photo Wall
Certifications
| Property | Typical value |
| Density | 1.22-1.23 g/cm³ |
| Melt finger(190°C, 2160g) | 4.12 G/10min |
| Melting point | 170-190°C |
| Vicat softening point(A/120) | 55°C |
| Tensile Strength | 61 MPa |
| Elongation at break | 22% |
| Bending strength | 73 MPa |
| Impact strength | 8.8 kJ/M² |
| Water absorption | <0.6% |
| Printing temperature | 200-220°C |
| Subject | Download |
| PLA+ Curaprofile |  |
| iSANMATE_PLA_TDS | |
